Warm your winter with Rinnai Air 2026
As winter settles across Australia, keeping your home warm and energy-efficient becomes more important tha...
Read moreScroll through our range now and find the right answer for you today!
Skip to product information
DSZH Copper Pipe Flaring Tool Kit For HVAC 1/4”to 3/4” (5-in-1 Set)
SKU:
ST-806FT-L
$269.00
$198.99
Save $70.01
Recommended add-ons
Frequently Bought Together
Popular extras customers often add with this unit
Add with your order
No recommendations available right now.
DESCRIPTION
A copper flaring tool kit is only as good as the flares it produces, and that comes down to the mechanism doing the work. This kit uses an eccentric cone head to form clean, symmetrical 45-degree flares on soft copper tubing, brass, aluminium tubing, and mild steel, which are the right tools for HVAC, refrigeration, and plumbing jobs where a leak-free connection isn't optional.
The 5-in-1 set covers tube sizes from 1/4" through to 3/4" (5/16", 3/8", 1/2" and 5/8" included), so one case handles the sizes most Australian trade jobs actually call for.
Description
Specially designed for HVAC professionals and DIY enthusiasts alike. This comprehensive kit is tailored to facilitate precise and efficient flaring of copper pipes ranging from 1/4 inch to 3/4 inch in diameter. the flaring tool provides stability and control during the flaring process, while the ergonomic design enhances comfort and ease of use.
Features
- Metric & inch measurement
- Steel and coated chrome plating material
- 45-degree single flare
- The positioning scribing can fix the pipe extension
- All-in-One Kit:
- Gantry made of aluminum alloy
- Roller bearing cutter
- Trimming knife with hardness 65
- Engineering-grade plastic box
Built for Accuracy, Not Just Flaring
The eccentric cone mechanism is the core of what makes this kit different from a basic yoke-and-bar set. As the cone rotates off-centre through the copper tube, it works the metal gradually rather than forcing it.
This is what prevents splitting and produces a smooth, crack-free flare instead of a jagged one. A good flare needs to be smooth and symmetrical; a cracked or uneven flare won't seal no matter how tight the fitting is.
Key features of this kit:
-
Eccentric cone flaring head, smooth, accurate 45° single flares
-
Large feed screw handle, steady turning with less effort, better control through the flaring process
-
Roller bearing tube cutter, square, clean cuts before flaring or swaging prep
-
Trimming/deburring knife (hardness 65), removes burrs that cause leaks if left in
-
Positioning scribe, fixes and verifies correct pipe extension before you flare
-
Dual clamp blocks, sized in both inch and metric, so you're not converting on site
-
Aluminium alloy gantry, stability under load, less flex during the flare
-
Engineering-grade plastic case, keeps every individual tool organised on the job site
What's Included in the Kit
This is an all-in-one kit, not just a single flaring head:
-
Two clamp blocks (inch and metric sizing)
-
Roller bearing tube cutter
-
Deburring/trimming knife
-
Engineering-grade carry case
Everything needed to go from a raw length of tubing to a finished flare is in the one case, no hunting for a separate cutter or deburring tool.
Tube Sizes & Diameter Range
|
Inch sizes |
Metric sizes |
|---|---|
|
1/4" |
6mm |
|
5/16" |
9mm |
|
3/8" |
10mm |
|
1/2" |
12mm |
|
5/8" |
16mm |
|
3/4" |
19mm |
Cutter cutting range: 5–32mm, covering the tube diameters used across most residential and light commercial HVAC and plumbing work.
Flaring vs. Swaging: Which Do You Need?
Flaring and swaging solve different problems, and it's worth knowing which this kit is for. Flaring forms a cone-shaped end on the tube so it seats against a flare nut and fitting.
The seal comes from metal-to-metal contact, not thread tape or sealant, which is why getting an accurate flare matters more than how tight you wind the nut. Swaging instead expands one end of a tube so a second length of the same-diameter tube pushes directly into it, creating a push-fit joint without a separate fitting.
This kit is built for flaring. If a job calls for swaged, fitting-free push connections, a dedicated swaging kit or swage head is the right tool for that instead.
HVAC, Refrigeration & Plumbing Applications
This kit is designed around the flares used most on Australian job sites:
-
HVAC and split system installs, R410a line sets rely on accurate 45° flares for a gas-tight connection at every joint
-
Refrigeration work, soft copper flares on coil and pair-tube connections
-
Plumbing, copper and brass tubing joins where thread sealant alone won't hold pressure
Because the same kit flares copper, brass, aluminium tubing, and mild steel, it covers most materials a trade job will throw at it without switching tools.
SPECIFICATION
DIMENSION & WEIGHT
DOWNLOAD DOCUMENT
No downloadable document available.
Recommended Products
You May Also Need
Hand-picked products first, then auto-filled recommendations.
No recommended products found. Please choose collections with enough non-aircon products for aircon product pages.
Aircon Buying Guide
Helpful Aircon Guides & Tips
Explore practical buying guides, installation tips, and expert advice for air conditioners and electrical products.
Explore Our Latest Product Catalogue – July 2026 Edition
We are excited to announce the release of our July 2026 Product Catalogue! As a trusted supplier of elec...
Read more
How to Choose the Perfect Multi-Head Split System: Complete Buyer’s Guide
Everything you need to know about multi-head split systems. Discover how they work, key limitations, capaci...
Read more