Air Conditioner Stainless Steel Wall Bracket | 450mm | HD | Max 200KG
Built for strength, corrosion resistance and reliable long-term support, this heavy-duty air conditioner wall bracket is manufactured from premium 304-grade stainless steel and is designed to support loads of up to 200kg.
With an 800mm width and 450mm mounting depth, this stainless steel AC bracket provides a strong mounting solution for air conditioner outdoor units, heat pumps and HVAC equipment in residential and commercial installations.
Designed with installers and HVAC professionals in mind, the bracket features pre-drilled mounting holes for faster installation, anti-vibration rubber pads to help reduce vibration transfer, and a built-in spirit level to assist with accurate positioning. Rear bolt adjustment also allows installers to compensate for variations in wall angles during installation.
Dimensions: 800mm (W) × 450mm (D) × 350mm (H)
Maximum Load Capacity: 200kg
Material: Premium 304-grade stainless steel
Application: Air conditioner outdoor units, heat pumps and HVAC equipment, including larger loads that may be better suited to a stainless steel wall mount bracket 800x550x450mm with a higher capacity rating
Suitable For: Residential and commercial installations where a wall bracket helps keep the outdoor unit off the ground, improves access for servicing, and stops it from blocking walkways; select the right size and load rating to maintain airflow around the outdoor unit, allow easier maintenance, and match the unit’s mounting foot spacing, including medium-duty options such as a 450mm AC wall bracket rated up to 150kg rather than relying on a one size option.
For installers comparing brackets, fixed and adjustable designs are both common, and many options are made from folded or galvanized steel; referring to a size and type guide for choosing an AC wall bracket can also help match the mount to unit weight and site conditions.
|
|
450mm Stainless Steel |
550mm Stainless Steel |
|---|---|---|
|
Package Dimensions |
800mm (W) × 450mm (D) × 350mm (H) |
800mm (W) × 550mm (D) × 350mm (H) |
|
Weight |
4.35 kg |
5.7 kg |
|
A/C Capacity |
Below 5.0 kW |
Above 5.0kW |
|
Max. Load |
200 kg |
250 kg |
|
Color |
Stainless Steel Silver |
|
|
stainless steel |
304-grade |
304-grade |
Heavy-duty construction with up to 200kg load capacity, with different sizes and load options to suit a range of outdoor units
304 stainless steel for excellent corrosion resistance in industrial and exposed settings, and the right finish also helps extend service life outdoors
Corrosion-resistant brackets are especially recommended for coastal areas, where salt air can become a problem; brackets in these environments should be inspected annually
450mm mounting depth suitable for a wide range of outdoor units, with adjustable options available across common sizes
Anti-vibration rubber pads included to help reduce stress, as wall brackets can transmit vibration into the building structure
Vibration-control components act like silent blocks to absorb compressor vibration through the horizontal arms
Pre-drilled holes for quick and straightforward installation, making setup easier; choose the right fixings for the wall type, including chemical anchors for solid masonry where appropriate
Must be installed on a structural wall, never on weak wall structures or lightweight materials without reinforcement
Allow enough clearance beneath and around the unit for drainage, to avoid water pooling, maintain airflow and prevent obstruction; clear airflow also drives efficient heat exchange
Built-in spirit level for easier alignment so the bracket is installed correctly
Rear bolt adjustment for wall angle correction
Suitable for professional HVAC installers, electricians and trades, and a practical choice for many standard split system installs
Some adjustable models are compatible with brands such as Midea, depending on unit dimensions and mounting points, and separate hardware like a split air conditioner indoor unit wall mounting bracket can be used for the indoor head where required
Where wall mounting is not ideal, a slab may be better suited to site conditions, weight, or noise considerations, but higher-capacity units may benefit from a 550mm heavy duty wall bracket rated to 250kg when a structural wall is available
Installer note: check wall type, clearances and fixing positions before drilling to reduce risk
6 bracket sets per carton24 cartons per pallet
Ideal for air conditioning installers, HVAC contractors, electricians, builders and other trades requiring reliable AC installation hardware in bulk, alongside other air conditioning accessories and spare parts needed for complete system installs.
Available from Star Sparky (about our Brisbane-based electrical and air conditioning supply business), a Queensland retail and trade supplier based in Underwood, Brisbane, supplying air conditioners, air conditioning accessories, HVAC supplies, electrical accessories, installation materials and trade tools to customers and professionals across Brisbane, the Gold Coast and Queensland, and other states. If you have technical questions, call 1300 996 996 or email support@starsparky.com.au, our team can help with product selection, stock checks and placing an order.
No specification available.
No downloadable document available.
Scroll through our range now and find the right answer for you today!
Recommended Products
Hand-picked products first, then auto-filled recommendations.
Aircon Buying Guide
Explore practical buying guides, installation tips, and expert advice for air conditioners and electrical products.
Celebrate the MHIAA 2026 Nonna Knows Best Cashback Promotion! Enjoy up to $500 cashback when you purchase a...
Read more
Table of Content How to Choose an AC Wall Bracket Two questions decide your bracket Choosing by weight: ...
Read more
Table of Content How to Choose an AC Mounting Base Base or bracket? Start here The types of AC mounting...
Read more
Call us — we may match selected AirCon deals
No obligation • T&Cs apply
